Service Discipline 02
RCC & Structural Design
Reinforced Cement Concrete (RCC) structural engineering requires rigorous load take-down calculations, foundation-soil interaction modeling, and millimetric rebar scheduling to deliver crack-free, seismic-resilient commercial and residential buildings. Fusion Developers produces complete, stamped structural packages for multi-story plazas, basements, water reservoirs, and industrial machine foundations across Pakistan.
Multi-Story Commercial
Complete frame analysis in ETABS & STAAD.Pro for mid-rise and high-rise developments
Watertight Basements
Subterranean retaining walls, diaphragm slurry walls, and membrane waterproofing
Deep Foundation Engineering
Geotechnical analysis for raft foundations, strap footings, and bored cast-in-place piles
BOQ-Linked BBS
Bar Bending Schedules cross-referenced with mill cut lists and automated take-offs
Rigorous Structural Engineering & Code Compliance
Every concrete drawing package leaving our Lahore design office is audited for compliance with the Building Code of Pakistan (BCP Seismic Provisions 2007/2021), ACI 318-19 (American Concrete Institute), and BS 8110. From gravity load take-downs to lateral wind and earthquake dynamic spectral analysis, our engineering models reflect verified on-site soil boring conditions.
| Design Element | Engineering Standard | Quality Assurance Gate |
|---|---|---|
| Raft & Combined Foundations | ACI 336 / Bowles Geotechnical | Settlement and punch-shear verification under 1.5x factor of safety |
| Earthquake Ductile Detailing | ACI 318 Chapter 18 / BCP Ch. 5 | Confining stirrup spacing (s <= d/4) at plastic hinge zones |
| Liquid Retaining Structures | BS 8007 / ACI 350-06 | Crack width control (w_max <= 0.1mm) with waterstop integration |
| Deep Basement Retention | CIRIA C760 / BS 8002 | Lateral earth pressure + surcharge modeling with tie-back anchors |
Technical Specifications & Design Standards
- Concrete Compressive Strength:Class M20 to M50 (2,500 psi to 6,000 psi cylinder strength)
- Reinforcing Steel Specification:ASTM A615 / A706 Grade 60 (Yield strength fy = 414 MPa / 60,000 psi)
- Finite Element Analysis Tools:CSI ETABS Ultimate, SAP2000, SAFE (Slabs & Foundations), STAAD.Pro
- Minimum Cover Compliance:Foundations: 75mm | Columns/Beams: 40mm | Slabs: 20mm | Water Tanks: 50mm
- Bar Bending Schedules (BBS):Formatted to BS 8666 / IS 2502 with cutting lengths and bend deductions
- Statutory NOC Integration:Lahore Development Authority (LDA), DHA, CDA, and Punjab EPA clearance sets
Commercial RCC Structural Design & Execution Rates in Pakistan
- Structural Design & Consulting: PKR 25 – 45 / sq ft of covered area — Includes 3D analysis, stamped drawing set, BBS, soil report review, and site QC visits.
- Grey Structure Construction (Civil): PKR 2,400 – 3,400 / sq ft — Includes excavation, lean concrete, raft, columns, beams, slabs, brickwork, and plastering.
- Complete Turnkey Commercial Shell: PKR 5,500 – 9,000+ / sq ft — Complete with basement parking, glazed retail podium, MEP rough-ins, and elevator cores.